 |
|
|
|
|
|
|
|
|
|
|
|
 |
|
||||||||||
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
 |
 |
 |
 |
 |
|
||||||
Introduction
S & S has been manufacturing precast products since 1979. The Company began manu-facturing for the Florida Department of Transportation and other county and city governments in 1988. Its Quality Control employees are ACI and FDOT certified.Product Description
Currently, S & S is limited to making 24" x 20" T Beam of the available sizes in the market. Generic information is illustrated and detailed in the FDOT Standard Drawings, Index. We have provided this product for commercial and county projects.http://www.dot.state.fl.us/rddesign/rd/RTDS/08/20310.pdf
http://www.dot.state.fl.us/rddesign/rd/RTDS/08/20320.pdfStrand & Strand Pattern References: ASTM A416
The most commonly used strand is ½" 270 LoLax cable, however, ½" special, 9/16" or .6 strands have been used when higher level of prestress is required. Debonding of cable is a technique widely used in the manufacture of this product.Concrete References: ASTM C33, C94, C150, C494; ACI 304R, 305R, 309R
The standard mix is a 5000-PSI design with a water ratio of 0.42 or less. Other mix designs have been used when specified. These mix designs range from 6000, 7000, and Class V Special. A target slump of 3" is a standard.Reinforcement
Standard grade 60 rebar has traditionally been used for this product; however, S & S has made this product with epoxy rebar and Varigrid. Varigrid is a weld wire product by Ivy Steel, which is approved by FDOT as a substitute for rebar.
1. Reinforcing Bars - Grade 60 References: ASTM A 615/A, 615M
2. Welded Wire Fabric References: ASTM A185, A497
3. Reinforcement Placement References: ACI 318; PCI MNL - 116
MMFX steel is available for aggressive environments.Admixtures & Additives References: ASTM C494, C618, C989
1. Super Plastersizer - Super P is routinely used to obtain a working slump of 5" for concrete with a l" normal slump.
2. Fly Ash - This product is available upon request or as designed by the engineer for record for a project. A mix design would be submitted for approval. This product increases the density of the concrete, which in turn gives longer live, and corrosion resistances.
3. Silica Fume - This product is available upon request or as designed by the engineer of record for a project. Mix
Design would be submitted for approval. This product increases the density of the concrete, which in turn gives longer live, and corrosion resistances.
4. Corrosion Inhibitors - S & S Structural Systems, Inc. has used several brand name products such as W. R. Grace, DCI; Masterbuilders, Rheocrets; Universal Design, and Ipanex. This product is available upon request or as designed by the engineer of record for a project. A mix design would be submitted for approval
5. Fiber Mesh - This product is available upon request or as design by the engineer of record for a project. A mix design would be submitted for approval.
Siloxan Penetrating Sealer
This material is a 15% siloxane in aromatic 100, which imparts repellency to all types of cementitious surfaces (concrete). The sealer penetrates and chemically reacts within the pores of concrete to form a long lasting water-repellent surface. This water repellency also acts as a barrier to chloride ions and other waterborne contaminants. Therefore, treating concrete structures with a sealer greatly reduces damage caused by:This protective treatment diminishes scaling, spalling, and subsequent delamination.
- Corrosion of steel reinforcing bars.
- Chemically aggressive environments.
Quality Assurance References: PCI MNL - 116; FDOT Standards
Sampling and testing will be done by S & S Quality Control Personnel per S & S Quality Control Plan. All personnel are to be ACI or FDOT certified. All in house testing equipment will be certified yearly by out side lab.
Introduction
S & S has been manufacturing precast products since 1979. The Company began manu-facturing for the Florida Department of Transportation and other county and city governments in 1988. Its Quality Control employees are ACI and FDOT certified.Product Description
Currently, S & S is limited to making Type II, Type II Mod, and Type III beams of the available sizes in the market. Generic information is illustrated and detailed in the FDOT Standard Drawings, Index. We have provided this product for the FDOT, commercial and county projects.http://www.dot.state.fl.us/rddesign/rd/RTDS/08/20110.pdf
http://www.dot.state.fl.us/rddesign/rd/RTDS/08/20120.pdf
http://www.dot.state.fl.us/rddesign/rd/RTDS/08/20130.pdf
Strand & strand Pattern References: ASTM A416
The most commonly used strand is ½" 270 LoLax cable, however, ½" special or 9/16" has been used when higher level of prestress is required. Debonding of cable is a technique widely used in the manufacture of this product.Concrete References: ASTM C33, C94, C150, C494; ACI 304R, 305R, 309R
The standard mix is a 5000-PSI design with a water ratio of 0.42 or less. Other mix designs have been used when specified. These mix designs range from 6000, 7000, and Class V Special. A target slump of 3" is a standard.Reinforcement
Standard grade 60 rebar has traditionally been used for this product; however, S & S has made this product with epoxy rebar and Varigrid. Varigrid is a weld wire product by Ivy Steel, which is approved by FDOT as a substitute for rebar.
1. Reinforcing Bars - Grade 60 References: ASTM A 615/A, 615M
2. Welded Wire Fabric References: ASTM A185, A497
3. Reinforcement Placement References: ACI 318; PCI MNL - 116Admixtures & Additives References: ASTM C494, C618, C989
1. Super Plastersizer - Super P is routinely used to obtain a working slump of 5" for concrete with a l" normal slump.
2. Fly Ash - This product is available upon request or as designed by the engineer for record for a project. A mix design would be submitted for approval. This product increases the density of the concrete, which in turn gives longer live, and corrosion resistances.
3. Silica Fume - This product is available upon request or as designed by the engineer of record for a project. Mix
Design would be submitted for approval. This product increases the density of the concrete, which in turn gives longer live, and corrosion resistances.
4. Corrosion Inhibitors - S & S Structural Systems, Inc. has used several brand name products such as W. R. Grace, DCI; Masterbuilders, Rheocrets; Universal Design, and Ipanex. This product is available upon request or as designed by the engineer of record for a project. A mix design would be submitted for approval
5. Fiber Mesh - This product is available upon request or as design by the engineer of record for a project. A mix design would be submitted for approval.
Siloxan Penetrating Sealer
This material is a 15% siloxane in aromatic 100, which imparts repellency to all types of cementitious surfaces (concrete). The sealer penetrates and chemically reacts within the pores of concrete to form a long lasting water-repellent surface. This water repellency also acts as a barrier to chloride ions and other waterborne contaminants. Therefore, treating concrete structures with a sealer greatly reduces damage caused by:
- Corrosion of steel reinforcing bars.
- Chemically aggressive environments.
This protective treatment diminishes scaling, spalling, and subsequent delamination.
Quality Assurance References: PCI MNL - 116; FDOT Standards
Sampling and testing will be done by S & S Quality Control Personnel per S & S Quality Control Plan. All personnel are to be ACI or FDOT certified. All in house testing equipment will be certified yearly by out side lab.
Introduction
S & S has been manufacturing precast products since 1979. The Company began manu-facturing for the Florida Department of Transportation and other county and city governments in 1988. Its Quality Control employees are ACI and FDOT certified.Variety of Products
A wide variety of beams can be manufactured. The range of uses extends from single residential homes to municipal fishing piers. The requirements of each design can be infinite. Such as:
1. Exposed J Bolts 5. Cantilever ends
2. Exposed anchor straps 6. Weld plates
3. PVC Holes for bolts and saddles 7. Threaded couplers
4. Electrical and plumbing conduit 8. Exposed rebar for CIPStrand & Strand Pattern References ASTM A 416
The most common strand used is 1/2" 270 LoLax. Strand sizes range from 3/8", 7/16", ½", & ½" special.. Hence, the size of strand and pattern are depending on the product and its application.Reinforcement
l. Reinforcing Bars - Grade 60 References: ASTM A 615/A, 61
2. Reinforcement Placement References: ACI 318, PCI MNL - 116Concrete References: ASTM C33, C94, C150, C494; ACI 304R, 305R, 309R
The standard mix is a 5000-PSI design with a water ratio of 0.42 or less. A target slump of 3" is a standard.
Admixtures & Additives References: ASTM C494, C618, C989
1. Super Plastersizer - Super P is routinely used to obtain a working slump of 5" for concrete with a l" normal slump.
2. Fly Ash - This product is available upon request or as designed by the engineer for record for a project. A mix design would be submitted for approval. This product increases the density of the concrete, which in turn gives longer live, and corrosion resistances.
3. Silica Fume - This product is available upon request or as designed by the engineer of record for a project. Mix Design would be submitted for approval. This product increases the density of the concrete, which in turn gives longer live, and corrosion resistances.
4. Corrosion Inhibitors - S & S Structural Systems, Inc. has used several brand name products such as W. R. Grace, DCI; Masterbuilders, Rheocrets; Universal Design, and Ipanex. This product is available upon request or as designed by the engineer of record for a project. A mix design would be submitted for approval
5. Fiber Mesh - This product is available upon request or as design by the engineer of record for a project. A mix design would be submitted for approval.
Siloxan Penetrating Sealer
This material is a 15% siloxane in aromatic 100, which imparts repellency to all types of cementations surfaces (concrete). The sealer penetrates and chemically reacts within the pores of concrete to form a long lasting water-repellent surface. This water repellency also acts as a barrier to chloride ions and other waterborne contaminants. Therefore, treating concrete structures with a sealer greatly reduces damage caused by:
- Corrosion of steel reinforcing bars.
- Chemically aggressive environments.
This protective treatment diminishes scaling, spalling, and subsequent delamination.
Quality Assurance References: PCI MNL - 116; FDOT Standards
Sampling and testing will be done by S & S Quality Control Personnel per S & S Quality Control Plan. All personnel are to be ACI or FDOT certified. All in house testing equipment will be certified yearly by out side lab.
Introduction
S & S has been manufacturing precast products since 1979. The Company began manu-facturing for the Florida Department of Transportation and other county and city governments in 1988. Its Quality Control employees are ACI and FDOT certified.Variety of Product
We can make a wide range of slabs in width, depth, & length. Additional, the slabs can be voided or solid. We are able to make channel and box sections. Deck slabs may have posttensioning system; weld plates or exposed rebar to tie the units together with topping concrete. Each project has its own variations from skews, utilities, sidewalks, & barrier walls. We have made deck slabs for FDOT, county DOT & cities as well as for private developments. Some bridges have had additional architectural panels attach to the sides via weld plates by others. The driving surface can be the deck itself or topped with asphalt or paver brick.Strand and Strand Pattern References: ASTM A416
The most commonly used strand is ½" 270 LoLax cable, however, 9/16 has been used when higher level of prestress if required. Debonding of cable is a technique widely used in the manufacture of this product.Reinforcement
1. Reinforcing Bars - Grade 60 References: ASTM A 615/A, 615M
2. Welded Wire Fabric References: ASTM A185, A497
3. Reinforcement Placement References: ACI 318; PCI MNL - 116Concrete References: ASTM C494, C618, C989
The standard mix is a 5000-PSI design with a water ratio of 0.42 or less. Other mix designs have been used when specified. These mix designs range from 6000, 7000, and Class V Special. A target slump of 3" is a standard.Admixtures & Additives References: ASTM C494, C618, C989
1. Super Plastersizer - Super P is routinely used to obtain a working slump of 5" for concrete with a l" normal slump.
2. Fly Ash - This product is available upon request or as designed by the engineer for record for a project. A mix
design would be submitted for approval. This product increases the density of the concrete, which in turn gives longer live, and corrosion resistances.
3. Silica Fume - This product is available upon request or as designed by the engineer of record for a project. Mix
Design would be submitted for approval. This product increases the density of the concrete, which in turn gives longer live, and corrosion resistances.
4. Corrosion Inhibitors - S & S Structural Systems, Inc. has used several brand name products such as W. R. Grace, DCI; Masterbuilders, Rheocrets; Universal Design, and Ipanex. This product is available upon request or as designed by the engineer of record for a project. A mix design would be submitted for approval
5. Fiber Mesh - This product is available upon request or as design by the engineer of record for a project. A mix design would be submitted for approval.
Siloxan Penetrating Sealer
This material is a 15% siloxane in aromatic 100, which imparts repellency to all types of cementitious surfaces (concrete). The sealer penetrates and chemically reacts within the pores of concrete to form a long lasting water-repellent surface. This water repellency also acts as a barrier to chloride ions and other waterborne contaminants. Therefore, treating concrete structures with a sealer greatly reduces damage caused by:
- Corrosion of steel reinforcing bars.
- Chemically aggressive environments.
This protective treatment diminishes scaling, spalling, and subsequent delamination.
Quality Assurance References: PCI MNL - 116; FDOT Standards
Sampling and testing will be done by S & S Quality Control Personnel per S & S Quality Control Plan. All personnel are to be ACI or FDOT certified. All in house testing equipment will be certified yearly by out side lab.
Introduction
S & S has been manufacturing precast products since 1979. The Company began manu-facturing for the Florida Department of Transportation and other county and city governments in 1988. Its Quality Control employees are ACI and FDOT certified.Product Description
Crown Span™ is a patented design for three sided prestress bridge system. The prestress deck is similar to the deck slabs as used by the FDOT. The other two sided are the legs that the deck rests on. The systems has the look of a box culvert, however, clear spans can be as long as 40'. Maximum leg height is 8", however greater heights can be achieved by the use of pedestal footer. Precast footer and wing walls are an option. If the designer wants a different look other than the box culvert, a curved haunch can be provided. Additional information is available upon request.
References:Strand & Strand Pattern
The most commonly used strand is 1/2" 270 LoLax cable, however, ½" special or 9/16" has been used when higher level
of prestress is required. Debonding of cable is a technique widely used in the manufacture of this product.Reinforcement
Standard grade 60 rebar has traditionally been used for this product; however, S & S has made this product with epoxy rebar and Varigrid. Varigrid is a weld wire product by Ivy Steel, which is approved by FDOT as a substitute
for rebar.
1. Reinforcing Bars - Grade 60 References: ASTM A 615/A, 615M
2. Welded Wire Fabric References: ASTM A185, A497
3. Reinforcement Placement References: ACI 318; PCI MNL - 116Concrete References: ASTM C33, C94, C150, C494; ACI 304R, 305R, 309R
The standard mix is a 5000-PSI design with a water ratio of 0.42 or less. Other mix designs have been used when specified. These mix designs range from 6000, 7000, and Class V Special. A target slump of 3" is a standard.
Admixtures & Additives References: ASTM C494, C618, C989
1. Super Plastersizer - Super P is routinely used to obtain a working slump of 5" for concrete with a l" normal slump.
2. Fly Ash - This product is available upon request or as designed by the engineer for record for a project. A mix design would be submitted for approval. This product increases the density of the concrete, which in turn gives longer live, and corrosion resistances.
3. Silica Fume - This product is available upon request or as designed by the engineer of record for a project. Mix Design would be submitted for approval. This product increases the density of the concrete, which in turn gives longer live, and corrosion resistances.
4. Corrosion Inhibitors - S & S Structural Systems, Inc. has used several brand name products such as W. R. Grace, DCI; Masterbuilders, Rheocrets; Universal Design, and Ipanex. This product is available upon request or as designed by the engineer of record for a project. A mix design would be submitted for approval
5. Fiber Mesh - This product is available upon request or as design by the engineer of record for a project. A mix design would be submitted for approval.
Siloxan Penetrating Sealer
This material is a 15% siloxane in aromatic 100, which imparts repellency to all types of cementations surfaces (concrete). The sealer penetrates and chemically reacts within the pores of concrete to form a long lasting water-repellent surface. This water repellency also acts as a barrier to chloride ions and other waterborne contaminants. Therefore, treating concrete structures with a sealer greatly reduces damage caused by :
- Corrosion of steel reinforcing bars.
- Chemically aggressive environments.
This protective treatment diminishes scaling, spalling, and subsequent delamination.
Quality Assurance References: PCI MNL - 116; FDOT Standards
Sampling and testing will be done by S & S Quality Control Personnel per S & S Quality Control Plan. All personnel are to be ACI or FDOT certified. All in house testing equipment will be certified yearly by out side lab.
Introduction
S & S has been manufacturing precast products since 1979. The Company began manu-facturing for the Florida Department of Transportation and other county and city governments in 1988. Its Quality Control employees are ACI and FDOT certified.Variety of Products
A wide variety of products can be manufactured. The range of uses extends from single residential homes to municipal. The requirements of each design can be infinite. Such as:
1. Exposed J Bolts
2. Exposed anchor straps
3. PVC Holes for bolts and saddles
4. Electrical and plumbing conduit
5. Cantilever ends
6. Weld plates
7. Threaded couplers
8. Exposed rebar for CIPStrand & Strand Pattern References ASTM A 416
The most common strand used is 1/2" 270 LoLax. Strand sizes range from 3/8", 7/16", ½", & ½" special. Hence, the size of strand and pattern are depending on the product and its application.Reinforcement
l. Reinforcing Bars - Grade 60 References: ASTM A 615/A, 61
2. Reinforcement Placement References: ACI 318, PCI MNL - 116Concrete References: ASTM C33, C94, C150, C494; ACI 304R, 305R, 309R
The standard mix is a 5000-PSI design with a water ratio of 0.42 or less. A target slump of 3" is a standard.
Admixtures & Additives References: ASTM C494, C618, C989
1. Super Plastersizer - Super P is routinely used to obtain a working slump of 5" for concrete with a l" normal slump.
2. Fly Ash - This product is available upon request or as designed by the engineer for record for a project. A mix design would be submitted for approval. This product increases the density of the concrete, which in turn gives longer live, and corrosion resistances.
3. Silica Fume - This product is available upon request or as designed by the engineer of record for a project. Mix Design would be submitted for approval. This product increases the density of the concrete, which in turn gives longer live, and corrosion resistances.
4. Corrosion Inhibitors - S & S Structural Systems, Inc. has used several brand name products such as W. R. Grace, DCI; Masterbuilders, Rheocrets; Universal Design, and Ipanex. This product is available upon request or as designed by the engineer of record for a project. A mix design would be submitted for approval
5. Fiber Mesh - This product is available upon request or as design by the engineer of record for a project. A mix design would be submitted for approval.
Siloxan Penetrating Sealer
This material is a 15% siloxane in aromatic 100, which imparts repellency to all types of cementations surfaces (concrete). The sealer penetrates and chemically reacts within the pores of concrete to form a long lasting water-repellent surface. This water repellency also acts as a barrier to chloride ions and other waterborne contaminants. Therefore, treating concrete structures with a sealer greatly reduces damage caused by:
- Corrosion of steel reinforcing bars.
- Chemically aggressive environments.
This protective treatment diminishes scaling, spalling, and subsequent delamination.
Quality Assurance References: PCI MNL - 116; FDOT Standards
Sampling and testing will be done by S & S Quality Control Personnel per S & S Quality Control Plan. All personnel are to be ACI or FDOT certified. All in house testing equipment will be certified yearly by out side lab.
Introduction
S & S has been manufacturing precast products since 1979. The Company began manu-facturing for the Florida Department of Transportation and other county and city governments in 1988. Its Quality Control employees are ACI and FDOT certified.Product Description
Currently, S & S is limited to making 24" x 20" T Beam of the available sizes in the market. Generic information is illustrated and detailed in the FDOT Standard Drawings, Index. We have provided this product for commercial and county projects.http://www.dot.state.fl.us/rddesign/rd/RTDS/08/20310.pdf
http://www.dot.state.fl.us/rddesign/rd/RTDS/08/20320.pdfStrand & Strand Pattern References: ASTM A416
The most commonly used strand is ½" 270 LoLax cable, however, ½" special, 9/16" or .6 strands have been used when higher level of prestress is required. Debonding of cable is a technique widely used in the manufacture of this product.Concrete References: ASTM C33, C94, C150, C494; ACI 304R, 305R, 309R
The standard mix is a 5000-PSI design with a water ratio of 0.42 or less. Other mix designs have been used when specified. These mix designs range from 6000, 7000, and Class V Special. A target slump of 3" is a standard.Reinforcement
Standard grade 60 rebar has traditionally been used for this product; however, S & S has made this product with epoxy rebar and Varigrid. Varigrid is a weld wire product by Ivy Steel, which is approved by FDOT as a substitute for rebar.
1. Reinforcing Bars - Grade 60 References: ASTM A 615/A, 615M
2. Welded Wire Fabric References: ASTM A185, A497
3. Reinforcement Placement References: ACI 318; PCI MNL - 116
MMFX steel is available for aggressive environments.Admixtures & Additives References: ASTM C494, C618, C989
1. Super Plastersizer - Super P is routinely used to obtain a working slump of 5" for concrete with a l" normal slump.
2. Fly Ash - This product is available upon request or as designed by the engineer for record for a project. A mix design would be submitted for approval. This product increases the density of the concrete, which in turn gives longer live, and corrosion resistances.
3. Silica Fume - This product is available upon request or as designed by the engineer of record for a project. Mix
Design would be submitted for approval. This product increases the density of the concrete, which in turn gives longer live, and corrosion resistances.
4. Corrosion Inhibitors - S & S Structural Systems, Inc. has used several brand name products such as W. R. Grace, DCI; Masterbuilders, Rheocrets; Universal Design, and Ipanex. This product is available upon request or as designed by the engineer of record for a project. A mix design would be submitted for approval
5. Fiber Mesh - This product is available upon request or as design by the engineer of record for a project. A mix design would be submitted for approval.
Siloxan Penetrating Sealer
This material is a 15% siloxane in aromatic 100, which imparts repellency to all types of cementitious surfaces (concrete). The sealer penetrates and chemically reacts within the pores of concrete to form a long lasting water-repellent surface. This water repellency also acts as a barrier to chloride ions and other waterborne contaminants. Therefore, treating concrete structures with a sealer greatly reduces damage caused by:This protective treatment diminishes scaling, spalling, and subsequent delamination.
- Corrosion of steel reinforcing bars.
- Chemically aggressive environments.
Quality Assurance References: PCI MNL - 116; FDOT Standards
Sampling and testing will be done by S & S Quality Control Personnel per S & S Quality Control Plan. All personnel are to be ACI or FDOT certified. All in house testing equipment will be certified yearly by out side lab.
Introduction
S & S has been manufacturing precast products since 1979. The Company began manu-facturing for the Florida Department of Transportation and other county and city governments in 1988. Its Quality Control employees are ACI and FDOT certified.Variety of Product
We can make a wide range of products in width, depth, & length. Units may be voided or solid. Units may have posttensioning systems; weld plates or exposed rebar to tie them together with topping concrete. Special additives can be added to enhance the product to prevent corrosion of the reinforcement. Unusual and odd shapes, which are one of a kind, are common for this application.Strand & Strand Pattern
The most commonly used strand is 1/2" 270 LoLax cable, however, 3/8", 7/16, ½" special, or 9/16" has been used when different levels of prestress is required. Debonding of cable is a technique widely used in the manufacture of these products.Concrete
The standard mix is a 5000-PSI design with a water ratio of 0.42 or less. Other mix designs have been used when specified. These mix designs range from 6000, 7000, and Class V Special. A target slump of 3" is a standard.
Admixtures
1. Super Plastersizer - Under the most commonly used strand is conditions the Super P is used routinely to obtain a working slump of 5".
2. Fly Ash - This product is available upon request or as designed by the engineer for record for a project. A mix design would be submitted for approval before the start of production.
3. Silica Fume - This product is available upon request or as designed by the engineer of record for a project. Mix design would be submitted for approval before the start of production.
4. Corrosion Inhibitors - S & S Structural Systems, Inc. has used several brand name products such as W. R. Grace, DCI; Masterbuilders, Rheocrets; Universal Design, and Ipanex. This product is available upon request or as designed by the engineer of record for a project. A mix design would be submitted for approval before the start of production.
5. Fiber Mesh - This product is available upon request or as design by the engineer of record for a project. A mix design would be submitted for approval before the start of production.
Siloxan Penetrating Sealer
This material is a 15% siloxane in aromatic 100, which imparts repellency to all types of cementations surfaces (concrete). The sealer penetrates and chemically reacts within the pores of concrete to form a long lasting water-repellent surface. This water repellency also acts as a barrier to chloride ions and other waterborne contaminants. Therefore, treating concrete structures with a sealer greatly reduces damage caused by:
- Corrosion of steel reinforcing bars.
- Chemically aggressive environments.
This protective treatment diminishes scaling, spalling, and subsequent delamination.
Quality Assurance References: PCI MNL - 116; FDOT Standards
Sampling and testing will be done by S & S Quality Control Personnel per S & S Quality Control Plan. All personnel are to be ACI or FDOT certified. All in house testing equipment will be certified yearly by out side lab.
Introduction
S & S has been manufacturing precast products since 1979. The Company began manu-facturing for the Florida Department of Transportation and other county and city governments in 1988. Its Quality Control employees are ACI and FDOT certified.Variety of Product
If it can be designed and shipped on a truck, we can make it. The following is just a sample of what we have done:
1. Retaining walls - commonly used in conjunction with our bridge units. Generic information is illustrated and detailed in the FDOT Standard Drawings, Index 800 Through 822.
2. Pile Caps - Most commonly used in small projects such as fishing piers, boat docks, etc. Once the concrete pile has been installed the cap is placed on top and grout is used to complete the connection.
3. Pipe Cradles - Very similar to pile caps but used for a utility pipeline in a water crossing.
4. Boat Ramps - This assures the customer of a quality concrete slab, which would be placed under water. Many different designs have been used for the same function.Reinforcement
1. Reinforcing Bars - Grade 60 References: ASTM A 615/A, 615M
2. Welded Wire Fabric References: ASTM A185, A497
3. Reinforcement Placement References: ACI 318; PCI MNL - 116Concrete References: ASTM C33, C94, C150, C494; ACI 304R, 305R, 309R
The standard mix is a 5000-PSI design with a water ratio of 0.42 or less. Other mix designs have been used when
specified. These mix designs range from 6000, 7000, and Class V Special. A target slump of 3" is a standard.Admixtures & Additives References: ASTM C494, C618, C989
1. Super Plastersizer - Super P is routinely used to obtain a working slump of 5" for concrete with a l" normal slump.
2. Fly Ash - This product is available upon request or as designed by the engineer for record for a project. A mix design would be submitted for approval. This product increases the density of the concrete, which in turn gives longer live, and corrosion resistances.
3. Silica Fume - This product is available upon request or as designed by the engineer of record for a project. Mix Design would be submitted for approval. This product increases the density of the concrete, which in turn gives longer live, and corrosion resistances.
4. Corrosion Inhibitors - S & S Structural Systems, Inc. has used several brand name products such as W. R. Grace, DCI; Masterbuilders, Rheocrets; Universal Design, and Ipanex. This product is available upon request or as designed by the engineer of record for a project. A mix design would be submitted for approval
5. Fiber Mesh - This product is available upon request or as design by the engineer of record for a project. A mix design would be submitted for approval.
Siloxan Penetrating Sealer
This material is a 15% siloxane in aromatic 100, which imparts repellency to all types of cementations surfaces (concrete). The sealer penetrates and chemically reacts within the pores of concrete to form a long lasting water-repellent surface. This water repellency also acts as a barrier to chloride ions and other waterborne contaminants. Therefore, treating concrete structures with a sealer greatly reduces damage caused by:
- Corrosion of steel reinforcing bars.
- Chemically aggressive environments.
This protective treatment diminishes scaling, spalling, and subsequent delamination.
Quality Assurance References: PCI MNL - 116; FDOT Standards
Sampling and testing to be done by S & S Quality Control Personnel per S & S Quality Control Plan. All personnel are to be ACI or FDOT certified. All in house testing equipment will be certified yearly by out side lab.
Introduction
S & S has been manufacturing precast products since 1979. The Company began manu-facturing for the Florida Department of Transportation and other county and city governments in 1988. Its Quality Control employees are ACI and FDOT certified.Product Description
S&S Manufactures 10", 12", 14", 14" taper, and 18" pile. We have provided this product for the FDOT, commercial and county projects. We have provided many extra features to enhance the product and provide greater utility. Some of these features would be PVC holes, weld plates, H pile stingers, and special shapes for unique applications. Additionally, rebar may be added at the upper or full section for increased moment loads. Generic information is illustrated and detailed in the FDOT Standard Drawings, Index:Field Splice
http://www.dot.state.fl.us/rddesign/rd/RTDS/08/20601.pdf14" Pile Details
http://www.dot.state.fl.us/rddesign/rd/RTDS/08/20614.pdf18" Pile Details
http://www.dot.state.fl.us/rddesign/rd/RTDS/08/20618.pdfPile Splice (click for photo)
S&S has made splice for 14" & 18" using the Sure Lock Splice. These pile when connected exceed over 140'.Stinger Pile (click for photo)
S&S has made stinger pile for 12", 14" & 18" pile.Strand & strand Pattern References: ASTM A416
The most commonly used strand is ½" 270 LoLax cable, however, 3/8", ½" special or 9/16" has been used when different levels of prestress are required.Reinforcement
1. Spirals shall be cold-drawn steel wire References: ASTM A82
2. Reinforcement Placement References: ACI 318; PCI MNL - 116Concrete References: ASTM C33, C94, C150, C494; ACI 304R, 305R, 309R
The standard mix is a 5000-PSI design with a water ratio of 0.42 or less. Other mix designs have been used when specified. These mix designs range from 6000, 7000, and Class V Special. A target slump of 3" is a standard.Admixtures & Additives References: ASTM C494, C618, C989
1. Super Plastersizer - Super P is routinely used to obtain a working slump of 5" for concrete with a l" normal slump.
2. Fly Ash - This product is available upon request or as designed by the engineer for record for a project. A mix design would be submitted for approval. This product increases the density of the concrete, which in turn gives longer live, and corrosion resistances.
3. Silica Fume - This product is available upon request or as designed by the engineer of record for a project. Mix Design would be submitted for approval. This product increases the density of the concrete, which in turn gives longer live, and corrosion resistances.
4. Corrosion Inhibitors - S & S Structural Systems, Inc. has used several brand name products such as W. R. Grace, DCI; Masterbuilders, Rheocrets; Universal Design, and Ipanex. This product is available upon request or as designed by the engineer of record for a project. A mix design would be submitted for approval.
5. Fiber Mesh - This product is available upon request or as design by the engineer of record for a project. A mix design would be submitted for approval.
Siloxan Penetrating Sealer
This material is a 15% siloxane in aromatic 100, which imparts repellency to all types of cementations surfaces (concrete). The sealer penetrates and chemically reacts within the pores of concrete to form a long lasting water-repellent surface. This water repellency also acts as a barrier to chloride ions and other waterborne contaminants. Therefore, treating concrete structures with a sealer greatly reduces damage caused by:
- Corrosion of steel reinforcing bars.
- Chemically aggressive environments.
This protective treatment diminishes scaling, spalling, and subsequent delamination.
Quality Assurance References: PCI MNL - 116; FDOT Standards
Sampling and testing will be done by S & S Quality Control Personnel per S & S Quality Control Plan. All personnel are to be ACI or FDOT certified. All in house testing equipment will be certified yearly by out side lab.
Click to view additional images
Introduction
S & S has been manufacturing precast products since 1979. The Company began manu-facturing for the Florida Department of Transportation and other county and city governments in 1988. Its Quality Control employees are ACI and FDOT certified.Variety of Product
The two categories Seawall Slabs and Sheet Pile are basically the same except for the use of reinforcement. Available sizes are 8", 10" or 12" thick units. The most commonly used widths are 30", 48", or 60". However, custom widths are available to best fit your project
Seawall Slabs - This product is reinforced concrete with grade 60 rebar.
Sheet Pile - This product is prestress with 270K strands. Generic information is illustrated and detailed in the FDOT Standard Drawings, Index:http://www.dot.state.fl.us/rddesign/rd/RTDS/08/20400.pdf
http://www.dot.state.fl.us/rddesign/rd/RTDS/08/20410.pdf
http://www.dot.state.fl.us/rddesign/rd/RTDS/08/20412.pdf
http://www.dot.state.fl.us/rddesign/rd/RTDS/08/20430.pdf
http://www.dot.state.fl.us/rddesign/rd/RTDS/08/20440.pdfMany variations on the standard are available, the following are some examples:
1. Radius Sheets - when placed together they form an arc - Skyway Bridge, St Pete FDOT.
2. Wedge Pile - in very long runs, a few are required due to creepage.
3. Starter Pile - has a double wedge at bottom and female on both sides.
4. Corner Pile- infinite combinations are available. Typical angles are: 30 , 60 , 90 , and 130 .
5. Square Edge - used with Square Piling when interlocking is not required.Strand & Strand Pattern References ASTM A 416
The most common strand used is 1/2" 270 LoLax. Strand sizes range from 3/8", 7/16", ½", & ½" special. Hence, the size of strand and pattern are depending on the product and its application.Reinforcement
1. Reinforcing Bars - Grade 60 References: ASTM A 615/A, 61
2. Reinforcing Bars Option – Grade 60 or 100 MMFX ASTM 1035
3. Reinforcement Placement References: ACI 318, PCI MNL - 116Concrete References: ASTM C33, C94, C150, C494; ACI 304R, 305R, 309R
The standard mix is a 5000-PSI design with a water ratio of 0.42 or less. A target slump of 3" is a standard. Other mix designs have been used when specified. These mix designs range from 6000, 7000, and Class V Special.
Admixtures & Additives References: ASTM C494, C618, C989
1. Super Plastersizer - Super P is routinely used to obtain a working slump of 5" for concrete with a l" normal slump.
2. Fly Ash - This product is available upon request or as designed by the engineer for record for a project. A mix design would be submitted for approval before the start of production. This product increases the density of the concrete, which in turn gives longer live, and corrosion resistances.
3. Silica Fume - This product is available upon request or as designed by the engineer of record for a project. Mix design would be submitted for approval before the start of production. This product increases the density of the concrete, which in turn gives longer live, and corrosion resistances.
4. Corrosion Inhibitors - S & S Structural Systems, Inc. has used several brand name products such as W. R. Grace, DCI; Masterbuilders, Rheocrets; Universal Design, and Ipanex. This product is available upon request or as designed by the engineer of record for a project. A mix design would be submitted for approval before the start of production.
Siloxan Penetrating Sealer
This material is a 15% siloxane in aromatic 100, which imparts repellency to all types of cementations surfaces (concrete). The sealer penetrates and chemically reacts within the pores of concrete to form a long lasting water-repellent surface. This water repellency also acts as a barrier to chloride ions and other waterborne contaminants. Therefore, treating concrete structures with a sealer greatly reduces damage caused by:
- Corrosion of steel reinforcing bars.
- Chemically aggressive environments.
This protective treatment diminishes scaling, spalling, and subsequent delamination.
Quality Assurance References: PCI MNL - 116; FDOT Standards
Sampling and testing will be done by S & S Quality Control Personnel per S & S Quality Control Plan. All personnel are to be ACI or FDOT certified. All in house testing equipment will be certified yearly by out side lab.
Introduction
S & S has been manufacturing precast products since 1979. The Company began manu-facturing for the Florida Department of Transportation and other county and city governments in 1988. Its Quality Control employees are ACI and FDOT certified.Product
S&S makes only one style of stairs; 7" rise with an 11" tread. The width of the stair may vary depending on the project, typically 3'-5'. Maximum number of risers in one unit is 18 steps. Stairs have two types: Type One is a starter unit. This unit sets on the ground level and ends on an upper level. Type Two is a continuous unit. This unit fits between to upper levels.Reinforcement
l. Reinforcing Bars - Grade 60 References: ASTM A 615/A, 61
2. Reinforcing Bars - Option MMFX ASTM 1035
3. Reinforcement Placement References: ACI 318, PCI MNL - 116Concrete References: ASTM C33, C94, C150, C494; ACI 304R, 305R, 309R
The standard mix is a 5000-PSI design with a water ratio of 0.42 or less. A target slump of 3" is a standard.
Admixtures & Additives References: ASTM C494, C618, C989
1. Super Plastersizer - Super P is routinely used to obtain a working slump of 5" for concrete with a l" normal slump.
2. Fly Ash - This product is available upon request or as designed by the engineer for record for a project. A mix design would be submitted for approval. This product increases the density of the concrete, which in turn gives longer live, and corrosion resistances.
3. Silica Fume - This product is available upon request or as designed by the engineer of record for a project. Mix Design would be submitted for approval. This product increases the density of the concrete, which in turn gives longer live, and corrosion resistances.
4. Corrosion Inhibitors - S & S Structural Systems, Inc. has used several brand name products such as W. R. Grace, DCI; Masterbuilders, Rheocrets; Universal Design, and Ipanex. This product is available upon request or as designed by the engineer of record for a project. A mix design would be submitted for approval
5. Fiber Mesh - This product is available upon request or as design by the engineer of record for a project. A mix design would be submitted for approval.
Siloxan Penetrating Sealer
This material is a 15% siloxane in aromatic 100, which imparts repellency to all types of cementations surfaces (concrete). The sealer penetrates and chemically reacts within the pores of concrete to form a long lasting water-repellent surface. This water repellency also acts as a barrier to chloride ions and other waterborne contaminants. Therefore, treating concrete structures with a sealer greatly reduces damage caused by:
- Corrosion of steel reinforcing bars.
- Chemically aggressive environments.
This protective treatment diminishes scaling, spalling, and subsequent delamination.
Quality Assurance References: PCI MNL - 116; FDOT Standards
Sampling and testing will be done by S & S Quality Control Personnel per S & S Quality Control Plan. All personnel are to be ACI or FDOT certified. All in house testing equipment will be certified yearly by out side lab.
Introduction
S & S has been manufacturing precast products since 1979. The Company began manu-facturing for the Florida Department of Transportation and other county and city governments in 1988. Its Quality Control employees are ACI and FDOT certified.Product Description
The slabs may vary in thickness between 3.5" to 6" depending on the span requirements. The system is a composite of the prestress and topping concrete with topping rebar for temperature control. Total thickness of the system ranges between 9" to 11" depending on the requirement of the slope, if any. The system is rated as HS-20 or SBC-97 as a parking garage design.Strand & Strand Pattern References: ASTM A416
The most commonly used strand is 1/2" 270 LoLax. Strand sizes range from 3/8", 7/16", ½", & ½" special. Hence, the size of strand and pattern are depending on the product and its application.Reinforcement
1. Reinforcing Bars - Grade 60 References: ASTM A 615/A, 615M
2. Welded Wire Fabric References: ASTM A185, A497
3. Reinforcement Placement References: ACI 318; PCI MNL - 116Concrete References: ASTM C33, C94, C150, C494; ACI 304R, 305R, 309R
The standard mix is a 5000-PSI design with a water ratio of 0.42 or less. Other mix designs maybe used when specified.
Admixtures & Additives References: ASTM C494, C618, C989
1. Super Plastersizer - Super P is routinely used to obtain a working slump of 5" for concrete with a l" normal slump.
2. Fly Ash - This product is available upon request or as designed by the engineer for record for a project. A mix
design would be submitted for approval. This product increases the density of the concrete, which in turn gives longer live, and corrosion resistances.
3. Silica Fume - This product is available upon request or as designed by the engineer of record for a project. Mix
Design would be submitted for approval. This product increases the density of the concrete, which in turn gives longer live, and corrosion resistances.
4. Corrosion Inhibitors - S & S Structural Systems, Inc. has used several brand name products such as W. R. Grace, DCI; Masterbuilders, Rheocrets; Universal Design, and Ipanex. This product is available upon request or as designed by the engineer of record for a project. A mix design would be submitted for approval
5. Fiber Mesh - This product is available upon request or as design by the engineer of record for a project. A mix design would be submitted for approval.
Siloxan Penetrating Sealer
This material is a 15% siloxane in aromatic 100, which imparts repellency to all types of cementations surfaces (concrete). The sealer penetrates and chemically reacts within the pores of concrete to form a long lasting water-repellent surface. This water repellency also acts as a barrier to chloride ions and other waterborne contaminants. Therefore, treating concrete structures with a sealer greatly reduces damage caused by:
- Corrosion of steel reinforcing bars.
- Chemically aggressive environments.
This protective treatment diminishes scaling, spalling, and subsequent delamination.
Quality Assurance References: PCI MNL - 116; FDOT Standards
Sampling and testing will be done by S & S Quality Control Personnel per S & S Quality Control Plan. All personnel are to be ACI or FDOT certified. All in house testing equipment will be certified yearly by out side lab.
© 2007 - S & S Precast, Inc.
All Rights Reserved
PO Box 366098 ~ Bonita Springs, Florida 34136-6098
Phone: (239) 992-8685
Information deemed reliable
but not guaranteed. Prices subject to change without notice. Reproduction
or distribution
of any content or portion of this website is strictly prohibited without
written permission from S & S Precast, Inc.